Important Notes: Each panel should be labeled for you. Please consider these instructions a general guide for assembly; you may find other tricks or steps to help you. So you do not have to follow the guide below strictly.
Consider using gloves during assembly to prevent fingerprints.
Step 1: Lay out the acrylic panels Keep the protective paper film on the acrylic. Lay out all the acrylic panels on a clean surface, making sure they are positioned for easy identification.
Step 2: Begin with the wall panels (Left, Right, Top, Bottom) To begin, lay the Front Panel down to use as a guide; do not remove the paper yet! Remove the paper from each wall panel, join the sides to the top and bottom panels. Ensure that the KR logos on the side panels are facing outwards so they read correctly. Place the wall panels onto the Front Panel to help square them up and hold them in place.
At this point, depending on the case design, you may need to insert any shelves or dividers if included.
Step 3: Assemble the Front Panel Next, remove the paper film from the inside of the Back Panel. Place the Back Panel on top of the walls by aligning the tabs and holes. Using the acrylic nuts and screws provided, insert one of the nuts into the hole on one of the side panels. While holding the nut in place, insert a screw into the screw hole above and start threading it into the nut by hand to get it started. Then snug the screw down with the provided hex wrench. DO NOT OVER TIGHTEN!!! Repeat this process for each nut and screw set.
Step 4: Now for the first fun part! Insert you Item(s) Place your items into the case. Secure the item with clips if required.
Step 5: Securing the Item(s) Remove the paper from the back side of the Front Panel and place it onto the walls by aligning the tabs and holes together. Using the acrylic nuts and screws provided, insert one of the nuts into the hole on one of the side panels. While holding the nut in place, insert a screw into the screw hole above and start threading it into the nut by hand to get it started. Then snug the screw down with the provided hex wrench. DO NOT OVER TIGHTEN!!! Repeat this process for each nut and screw set.
Step 6: Enjoy your finished display Remove any remaining protective film and take a moment to appreciate your work! Your acrylic box display is now ready to show off your items.
Cleaning Notes: Avoid Windex or other harsh chemicals. Opt for an acrylic cleaner or soap and water to maintain the display's appearance. Use soft cloths like microfiber for cleaning, avoiding paper towels.
Step 7: Share your creation Share photos of your constructed acrylic box display on social media or with friends to present your collectible showpiece with style!
PS: Be sure to tag us so we can see it too!!!
Facebook / Instagram / Tiktok
@kreativerides
Video Example of Assembly
¿Tienes algún problema? ¿Necesitas ayuda?
Si surge algún problema, independientemente del tamaño, contáctenos mediante el formulario a continuación y permítanos ayudarle. Nos dedicamos por completo a su satisfacción con nuestros expositores y vitrinas. ¡Gracias por formar parte de la familia KR!
