Each panel should be labeled for you. Please consider these instructions a general guide for assembly — you may find additional tips along the way and don't need to follow every step strictly. Consider using gloves during assembly to prevent fingerprints.
Step 1: Lay out the acrylic panels
Keep the protective paper film on the acrylic and lay out all panels on a clean surface, positioning them for easy identification.
Step 2: Assemble the wall panels (left, right, top, bottom)
Lay the front panel down to use as a guide — do not remove its paper yet. Remove the paper from each wall panel and join the side panels to the top and bottom panels. Ensure the KR logos on the side panels are facing outwards so they read correctly. Place the wall panels onto the front panel to help square them up and hold them in place.
At this point, depending on your case design, insert any shelves or dividers if included.
Step 3: Assemble the back panel
Remove the paper film from the inside of the back panel. Place the back panel on top of the walls by aligning the tabs and holes. Using the acrylic nuts and screws provided, insert one nut into the hole on one of the side panels. While holding the nut in place, insert a screw into the screw hole above and start threading it by hand. Then snug the screw down with the provided hex wrench.
Important: Do not overtighten. Repeat for each nut and screw set.
Step 4: Insert your item(s)
Flip the case over and place your items inside. Secure the product with the side clips if required.
Step 5: Secure the front panel
Remove the paper from the back side of the front panel and place it onto the walls by aligning the tabs and holes. Using the acrylic nuts and screws provided, insert one nut into the hole on one of the side panels. While holding the nut in place, insert a screw into the screw hole above and start threading it by hand. Then snug the screw down with the provided hex wrench.
Important: Do not overtighten. Repeat for each nut and screw set.
Step 6: Add the final touches
Remove any remaining protective film and clean the display with a microfiber towel for a pristine look.
Cleaning Notes: Avoid Windex or other harsh chemicals. Use an acrylic cleaner or soap and water to maintain the display's appearance. Always use soft cloths like microfiber — avoid paper towels.
Step 7: Enjoy your finished display
Take a moment to appreciate your work! Your acrylic vault display is now ready to show off your items.
Step 8: Share your creation
We'd love to see how it turned out! Share photos of your display on social media and tag us — we feature our favorite builds.
Find us on Facebook, Instagram & TikTok: @kreativerides
Video Example of Assembly
Have Issues? Need Support?
Should any issues arise, regardless of size, contact us using the form below and allow us to assist you. We are fully dedicated to your satisfaction with our displays and cases. Thank you for being part of the KR family!
